Dedicated Mircros Digital Sprite 2 Einstellungsanleitung PDF herunterladen (Seite 127)

127

DS2 Network Guide

Additional Information

Command Reference List

Command line

Command Description

<ESC> m\Ether_IP\xxx.xxx.xxx.xxx Set IP address of the unit.

<ESC> m\subnet\xxx.xxx.xxx.xxx Set subnet of the unit.

<ESC> m\gateway\xxx.xxx.xxx.xxx Set gateway of the unit.

<ESC> m\status Displays the status information or the unit; drive information,

comm. Ports information, enabled telemetry, etc.

<ESC> m\serial_mode\comx\disabled

Debug

PPP

Text

Telem This command will allow any of the serial ports to be set for

a specic function. Replace the x with the port number and

select from the list the option available (refer to the serial

port section of this manual for allocated functionality for each

port).

<ESC> m\security\Eng\Open

Off

Pass Allows the security password for debug mode to be enabled

(pass)or disable (off) on the unit.

<ESC> m\security\debug\Open

Off

Pass Allows the security password for debug mode to be enabled

(pass)or disable (off) on the unit.

ipcfg Shows the IP address, subnet mask and gateway set on the

unit.

TCP Ports Displays the active TCP ports supported on the unit.

1 2 ... 122 123 124 125 126 127 128 129 130

Keine Kommentare

Dedicated Mircros Digital Sprite 2 Einstellungsanleitung Seite 127