Dedicated Mircros Digital Sprite 2 Einstellungsanleitung PDF herunterladen (Seite 15)

DS2 Network Guide

Selection of manufacturer/model within the conguration pages will give control of the cameras.

Common telemetry operations such as pan, tilt, zoom, presets can be controlled via the Live page of

the web interface or via the Viewer software.

Note: Priorities are not allocated to the PTZ control; this works on the initial connection and

request having the control. Any subsequent connections will allow viewing but no control

until the initial connection is relinquished or after a set period (5 seconds) where control

commands have not been issued to the PTZ/dome camera.

Any of the video inputs on the unit can be congured for coaxial telemetry; this is achieved

in the Camera Set-up page.

1. Select Cameras -> Camera and Record Set-up to congure the individual cameras.

The coaxial protocols currently supported on the unit are:

BBV (BBV-C)

Pelco (Pelco-C)

Dennard (Dennard-C)

2. Ensure the corresponding camera has been enabled and select the telemetry protocol

from the Telemetry list for the corresponding camera.

3. Remember to save the changes you have made by selecting Save Settings!

Once you have selected the telemetry protocol it is possible to; review the image from the video

input, test the control, congure the features of the camera that are required for you application

(such as presets), and access the dome/PTZ camera menus to congure the more enhanced

features supported on the dome, refer to the manufacturers manual for the camera for these

features.

Function Description

Telemetry The drop down list contains all the supported protocols for coaxial

telemetry cameras, select the protocol for the corresponding

camera.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 129 130

Keine Kommentare

Dedicated Mircros Digital Sprite 2 Einstellungsanleitung Seite 15