Dedicated Mircros Digital Sprite 2 Einstellungsanleitung PDF herunterladen (Seite 20)

DS2 Network Guide

Function Description

Serial1 & Serial2 Serial ports 1 & 2 are RS-232 ports and can have the following

port usage assigned; off, debug, general purpose, PPP and text in

image, RS232 telemetry.

Serial 3 & 4 (Bus A and Bus B) Serial ports 3 & 4 are RS-232, RS-422 and RS-485 ports and

can have the following port usage assigned; off, debug, general

purpose, text in image, RS232/485 telemetry.

Telemetry type This is the list of serial telemetry protocols that are supported on

the unit.

Telemetry Matrix Monitor Matrices support many monitor outputs, this is the monitor output

that has been allocated for connection to the unit.

Telemetry Matrix Offset This is the matrix offset to allow any camera input on the matrix

to be set as input 1 for the unit. An example of this is in large

systems where multiple operators are allocated groups of

cameras, for ease of use each camera can be congured to start

at camera 1. However they could actually be connected to any

input on the matrix but we would select camera 1 which could be

controlling input 32 on the matrix.

Baud rate, parity, etc This allows the communication settings to be congured, note

when telemetry is selected these will not be active and will default

to predetermined settings.

This completes the Simple Conguration of the unit.

The unit can operate at the basic level and the remaining conguration would include functionality

that is specic to the customer requirements.

The following parameters have been congured:

Global settings

Video inputs

Cameras parameters

Record rates

Remote connectivity

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 129 130

Keine Kommentare

Dedicated Mircros Digital Sprite 2 Einstellungsanleitung Seite 20